Q&A Forums

Shaving foam Post New Topic | Post Reply

Author Comments
Thomas Swett
Posted: Jan 31, 2007 10:55 AM
Shaving foam
I am planning to do a project that has foam on the floor wich has been wet for 12 months. I want to shave off about 1/2" of the surface. The surface is to be coated with Polyurea afterwards. It's about 700 sq. ft.
Any suggestions?
Eric Boyd
Posted: Feb 01, 2007 04:17 AM
If it is 2lb. foam here is the only way that I
know how to shave it.

Posted: Feb 01, 2007 08:10 AM
Is the foam still wet? You will need to dry it out, scarfing it isn't enough. Email me and I'll send you the files on the foam planer that I use.

Thomas Swett
Posted: Feb 01, 2007 08:20 AM
Thanks for the input.
Thomas Swett
Posted: Feb 01, 2007 08:21 AM
It is supposed to be dried out by the time I apply the coating. Here is my e-mail.
Lane Hogstad
Posted: Feb 01, 2007 09:17 PM
George; What do you use for a planer?

You need to login to reply to this topic. Please click here to login.