Q&A Forums

MH3 stops pumping Post New Topic | Post Reply

Author Comments
Owen Whisnant
Posted: Aug 24, 2011 10:52 PM
MH3 stops pumping
Hey all I NEED HELP I have a glas craft MH3. It is about 2 years old. Got it just after the G boys bought glas craft. It has recently developed a problem of stopping its pump stroke just before it reaches the bottom stroke sensor. Has anyone had this problem b4. 1 other thing I installed the A side shaft seal kit could this be part of the problem. I would really appreciate any knowledge you might be able to share.
Lee
John Shockney
Posted: Aug 26, 2011 09:16 PM
I had a problem with ISO crystals around the shaft seal on my Guardian causing it to stop pumping.

Did you clean and polish the pump shaft when you replaced the seal?

Airpro
Owen Whisnant
Posted: Aug 29, 2011 10:22 AM
Thank you George.
I posted this thread and who shows up right away but George Spanos from SFDONE. It seems that he solved the issue in about 5 minutes. Ending the frustration. This is why a quality distributor is so important to success.
Thanks again George

You need to login to reply to this topic. Please click here to login.