Imbalance pressure problems | Equipment Q&A | Spray Foam Technical Questions and Answers | SprayFoam Magazine Q&A Forums

Q&A Forums

Author	Comments
son.goku Posted: May 17, 2018 05:07 AM	Imbalance pressure problems hi, good evening gentlemen's I have a pressure balance on my e20. today I went to recirculate the chemicals on my e20 model 2016. and everything seemed to be fine until I plug the gun back into the nuzzle and try to spray some foam. right when I close the valve on the reactor, the gauges did not startup even. the A side was just moving none stopping at 200psi and the B side kind start to rise up normal until reach 1000psi, after 1000psi the needle on the gauge start raising up none stopping and I had to open the valve to release the pressure. do anyone had this problem before? what should I do to fix it? I will really appreciate the help and suggestions, I need to get this rig running. ;)

Author

Comments

son.goku

Posted: May 17, 2018 05:07 AM

Imbalance pressure problems

hi, good evening gentlemen's I have a pressure balance on my e20.
today I went to recirculate the chemicals on my e20 model 2016.
and everything seemed to be fine until I plug the gun back into the nuzzle and try to spray some foam.
right when I close the valve on the reactor, the gauges did not startup even. the A side was just moving none stopping at 200psi and the B side kind start to rise up normal until reach 1000psi, after 1000psi the needle on the gauge start raising up none stopping and I had to open the valve to release the pressure. do anyone had this problem before? what should I do to fix it?
I will really appreciate the help and suggestions, I need to get this rig running. ;)

You need to login to reply to this topic. Please click here to login.