Q&A Forums

Water heated hoses? Post New Topic | Post Reply

Author Comments
Caleb DeFord
Posted: Aug 08, 2011 11:57 AM
Water heated hoses?
Hey yall,
I recently found out about a new spray rig configuration from Diimon and PSI that doesn't use a generator or shore power.
They use a heat exchanger, air compressor, and the coolant from the engine's radiator to heat the hoses and the tank heaters.
I think I'm interested in a setup like this, but I'm not sure. Is there anyone working with a setup like this who can tell me what they think? What about the water heated hoses, are they good, bad, or ugly?
Check the link at left to see what I'm talking about.
Todd Baxter
Posted: Aug 10, 2011 07:48 AM
I call diimon and they are going to stop making their rig. Also I have talked to a few that have used the psi rig and have had great results with it.
Posted: Aug 10, 2011 09:27 AM
Looks pretty cool! Is anyone using the siphon hooked to their stick pumps on here?

It has to be a lot cleaner than pulling stick pumps out of barrels to swap out!
Posted: Aug 13, 2011 07:48 PM
...bayu,,how bout a diaphrahm pump with lets say a 3/4" pipe pickup tube,,,set the pump on the drum top,,with the p/u tube down the 2" bung,,then xfer over to your 3/4 bung on your feed drum up front,,nice and quiet,,uses little air,,pump is easy to flush,,,

You need to login to reply to this topic. Please click here to login.