Q&A Forums
everyones opinions needed Post New Topic | Post Reply
| Author | Comments |
|---|---|
|
Eric Sparks
Posted: Jun 06, 2006 03:53 PM
|
everyones opinions needed
in your opinion what and or who are the best companies to work with and who do you think makes the best products (machine and foam) this would be very helpfull in making a decision
|
|
Gerry Wagoner
Posted: Jun 09, 2006 08:27 PM
|
It's a tough question, Sparky. Know why? Because there are so many decent people out there. Glascraft makes good machines, as does Gusmer/Graco. Suppliers, I can only speak about the ones I know. NCFI is good. Been with them for almost 20-years. Jameson is good. VFI is real good on their roof foam & hybrid polyurea. Don't know about Apex, but am considering trying a set. NAP makes a decent wall foam - 1.6 pound - yields about 6000 ft² per set. NH is good. As you build relationships with suppliers, your knowledge will increase. I recommend a company that can provide decent tech support--the foam business is greatly benefitted from a pool of ideas. Keep that trigger pulled, and have fun. gcw |
