Q&A Forums

Cleaner Post New Topic | Post Reply

Author Comments
Posted: Nov 09, 2007 11:59 AM
Cleaner
I had this request on my site, www.FoamBid.com
where do I send them to?
i am looking for a cleaner to flush on my graco xp2 machine
the line and unit, also to clean the gun and tools, aslo to clean cured material both poly erea and foam

do you have anything that will work

can you give me a price and shipping costs to toronto canada

thank you
mason
Posted: Nov 09, 2007 12:53 PM
I am not aware of a cleaner that works well on cured foam, but ask your foam supplier for their recommendations on materials to flush your foam equipment and lines. You should follow the flush with a plasticizer such as DOP (dioctyl phosphate) or TCP (tricrysal phosphate) and leave it in the proportioner and lines. This will keep any A side from setting up that is not quite flushed out all the way and on the B side it will prevent build up of moisture that could contaminate the system.

Most folks use a glycol ether for daily gun cleaning such as DPM. (dipropylene glycol monomethyl ether) again ask your supplier for their recommendation.

You need to login to reply to this topic. Please click here to login.